从应用、表面质量、刀具强度和询价参数角度，比较平底、球头和圆鼻硬质合金立铣刀。
Flat end mills, ball nose end mills and corner radius end mills can all remove metal, but they solve different machining problems. Choosing the wrong geometry can create poor surface finish, weak corners, long cycle time or unnecessary tool changes.
| Tool geometry | Best for | Watch out for |
|---|---|---|
| Flat / square end mill | Slots, shoulders, flat floors and general profiling | Sharp corners chip more easily in hard materials |
| Ball nose end mill | 3D contours, mold cavities, curved surfaces and finishing passes | Not ideal for flat-bottom floors without extra finishing strategy |
| Corner radius end mill | Stronger edges, roughing/finishing balance and better tool life | Radius must match part corner and programming strategy |
If the part drawing controls internal corner radius or floor finish, specify that before ordering the end mill.
Choose the matching end mill family
RFQ details that prevent wrong geometry
- Part material and hardness.
- Operation: slotting, side milling, roughing, finishing, contouring or mold cavity machining.
- Required internal corner radius, floor finish and tolerance.
- Machine rigidity, holder type, coolant condition and current failure mode.
Send your part drawing or current tool code. We can recommend square, ball nose or corner radius carbide end mills for your machining operation.
标签
平底铣刀 球头铣刀 区别圆鼻铣刀CNC铣刀怎么选