Affilatura CNC: frese, punte e utensili speciali
Guarda come produciamo frese, punte e utensili speciali in metallo duro con una rettificatrice CNC.
Guarda su YouTube2-Flute · TiSiN · R6mm Ball · HRC55 · Standard Reach
12mm 2-Flute TiSiN Solid Carbide Ball Nose End Millfor HRC55 3D Contouring & Mould Work
TiSiN-coated 2-flute ball nose end mills deliver superior chip clearance during 3D contouring and cavity machining in steel and stainless steel up to HRC55. With fewer flutes, cutting forces remain low during ramping, helical entry, and Z-level finishing passes — ideal for deep mould cavities and complex aerospace profiles. TiSiN hardness > 3,500 HV resists abrasion and oxidation at elevated cutting temperatures.
R6mm BallD1 12mmL2 30mmD2 12mmOAL 75mm2 FlutesTiSiNHRC55Standard ReachMOQ 1 pc
Get Pricing & Stock
Prezzo di riferimento
42,81 €
Prezzo fabbrica rif. (EUR)
Basato sul costo barra al 2026-07-10. Il preventivo finale può variare.
R6mm 2F TiSiN Ball Nose EM
L2 30mm · D2 12mm · OAL 75mm
Standard Reach · HRC55
✓ Factory direct pricing
✓ MOQ 1 piece, ships 1–5 days
✓ Custom ball radii available
Full Dimensions
Technical Specifications
| Ball Radius (R) | 6 mm |
| Cutter Diameter (D1 h7) | 12 mm |
| Flute Length (L2) | 30 mm |
| Shank Diameter (D2 h6) | 12 mm |
| Overall Length (L1) | 75 mm |
| Number of Flutes | 2 |
| End Geometry | Ball Nose (Spherical) |
| Coating | TiSiN Titanium Silicon Nitride |
| Max Material Hardness | HRC55 |
| Reach Category | Standard (D2/L1 = 0.160) |
| Substrate | K10/K20 Ultra-Fine Grain Carbide |
| Shank Tolerance | h6 |
| MOQ | 1 piece |
| Lead Time (standard) | 1–5 business days |
| Lead Time (custom) | 5–15 business days |
TiSiN · 2 Flute · HRC55
Ball R
6mm
D1 h7
12mm
L2
30mm
D2 h6
12mm
L1
75mm
Reach
Standard
Where This Tool Excels
R6mm TiSiN 2F — Recommended Applications
- ▸Injection mould parting surface contouring
- ▸Wind turbine blade mould 3D finishing
- ▸Structural aerospace component contouring
- ▸Large forging die rough and semi-finish passes
Machining Tip: R6mm produces wide effective cutting zone. In HRC55 hardened steel, use 10–20% D1 step-over for semi-finish; this gives scallop < 0.05mm. At this diameter, ensure minimum wall thickness of 6mm for workholding rigidity, or use vibration-damping toolholder.
3D Finishing Reference
Scallop Height vs Step-Over — R6mm
Residual scallop height (cusps) between adjacent tool paths, calculated for R6mm ball nose:
| Step-Over | Step-Over mm | Scallop Height (µm) | Typical Ra (µm) |
|---|---|---|---|
| 2% D1 | 0.24 | 1.2 | ≈ 0.24 |
| 5% D1 | 0.60 | 7.5 | ≈ 1.50 |
| 8% D1 | 0.96 | 19.2 | ≈ 3.85 |
| 10% D1 | 1.20 | 30.1 | ≈ 6.02 |
| 15% D1 | 1.80 | 67.9 | ≈ 13.58 |
| 20% D1 | 2.40 | 121.2 | ≈ 24.24 |
h = R − √(R² − (ae/2)²). Actual Ra depends on feed rate, chip load, and material.
ISO PISO MISO K
Coating Performance
TiSiN — Why It Works for Ball-End Machining
- ▸TiSiN hardness > 3,500 HV — superior to TiAlN on ball-end profiles
- ▸Low friction reduces heat at ball-tip during 3D contouring
- ▸Suitable for dry, MQL, or flood coolant environments
- ▸2-flute: maximum chip clearance for deep cavity ramp entry
Related Ball Nose Variants
Same Size in Other Coatings
Same Ball Radius, Different Reach
R6mm TiSiN · 2 Flute · HRC55 — Other Flute Lengths
Order R6mm 2-Flute TiSiN Ball Nose Today
Factory direct. MOQ 1 piece. Pricing confirmed within 4 hours.
DAL NOSTRO REPARTO
Come affiliamo e controlliamo gli utensili
Due video girati nel nostro reparto: affilatura CNC e controllo dimensionale.
Misurare frese in metallo duro a 0,001 mm
Il controllo delle frese di precisione in metallo duro con il sistema ZOLLER.
Guarda su YouTube