5D · Solid Carbide Drill · ø5.00mm

Punta integrale ø5.00 mm 5DSenza refrigerazione interna · compatibile con refrigerante esterno

The 5D ratio extends capability beyond standard depth without requiring the higher tooling cost of through-coolant drills. With external flood coolant and correct chip-breaking cycle, the 5D solid carbide drill achieves consistent hole quality in structural steel, cast iron, and aluminium alloys. A cost-effective choice when machine spindle does not support internal coolant.

Scanalatura 44,00 mmCodolo ø6,00 mmLunghezza totale 82,00 mmPunta 140°Rivestimento TiAlNSenza canali refrigeranteMOQ 1 pz

Richiedi prezzo e disponibilità

Prezzo di riferimento

18,68 €

Prezzo fabbrica rif. (EUR)

Basato sul costo barra al 2026-07-10. Il preventivo finale può variare.

ø5.00mm 5D Solid Carbide Drill

SKU: SCD-SCD-5D-D500

Preventivo WhatsApp RFQ emailUsa il modulo contatti →

✓ Prezzo diretto di fabbrica

✓ MOQ 1 piece, stock ships 1–5 days

✓ Lunghezze e diametri speciali disponibili

Dimensioni complete

Specifiche tecniche

Diametro taglio (D1 h7)ø5,00 mm
Equivalente imperiale0.1969"
Lunghezza scanalatura (L2)44,00 mm
Diametro codolo (D2 h6)ø6,00 mm
Lunghezza totale (L1)82,00 mm
Rapporto profondità5D (5× diameter)
Angolo punta140°
Angolo elica30°
Numero taglienti2
Refrigerazione internaNessuna External flood coolant compatible
RivestimentoTiAlN / TiSiN Oerlikon Balzers BALINIT®
SubstratoK10/K20 Solid Carbide 10% Co binder
TolleranzaDIN 1414 · ISO 5419
MOQ1 pezzo
Tempo standard1–5 giorni lavorativi
Tempo speciale5–15 giorni lavorativi

5D Dimensional Drawing

D1 h7
ø5,00
L2
44,00
D2 h6
ø6,00
L1
82,00
Point
140°
Ratio
5D

Dove questo utensile eccelle

ø5.00mm 5D — recommended applications

  • ▸ PCB sub-assembly fixtures
  • ▸ Small instrument housings
  • ▸ Jig & fixture components
  • ▸ Prototype precision parts
Consiglio di lavorazione: At ø5.00mm, use compressed air rather than flood coolant to prevent re-cutting of fine chips. Feed rate 0.04–0.08 mm/rev; spindle speed up to 8,000 RPM depending on material.
Coolant Advice: Compressed air or light oil mist recommended. External flood coolant acceptable at lower feed rates.

Compatibilità materiali

Materiali consigliati

6061-T6 Aluminium
303 Stainless Steel
Mild Steel (S235)
Brass CW614N

5×D Solid Carbide Drill — External Coolant Compatible

Medium depth, cost-effective for machines without internal coolant

5xD solid carbide drillmedium depth drill no coolantflood coolant 5D drillsolid carbide medium reach

Need Deeper Reach or Higher-Pressure Coolant?

ø5.00mm is also available as a Coolant-Thru drill (up to 25D) with internal twin channels.

Internal coolant-thru variant: OAL 82.00mm · L2 44.00mm (same 5D ratio)

Vedi versione con refrigerazione interna

Stesso diametro, diversa profondità

ø5,00 mm Also Available In

3D
3D
OAL 66.00mm · L2 28.00mm
8D
8D
OAL 90.00mm · L2 50.00mm

Stesso rapporto profondità, diametri vicini

Diametri vicini 5D

ø3.00
L2 28.00mm
OAL 58.00mm
ø4.00
L2 36.00mm
OAL 66.00mm
ø6.00
L2 44.00mm
OAL 82.00mm
ø7.00
L2 53.00mm
OAL 91.00mm
ø4.00mm 5D← Tutte le punte integraliø6.00mm 5D

Ready to Order ø5.00mm 5D Solid Carbide Drills?

Factory direct. MOQ 1 piece. Send us quantity and required delivery date — pricing confirmed within 4 business hours.

WhatsApp oraModulo contatti