5D · Solid Carbide Drill · ø3.00mm

Punta integrale ø3.00 mm 5DSenza refrigerazione interna · compatibile con refrigerante esterno

The 5D ratio extends capability beyond standard depth without requiring the higher tooling cost of through-coolant drills. With external flood coolant and correct chip-breaking cycle, the 5D solid carbide drill achieves consistent hole quality in structural steel, cast iron, and aluminium alloys. A cost-effective choice when machine spindle does not support internal coolant.

Scanalatura 28,00 mmCodolo ø4,00 mmLunghezza totale 58,00 mmPunta 140°Rivestimento TiAlNSenza canali refrigeranteMOQ 1 pz

Richiedi prezzo e disponibilità

Prezzo di riferimento

9,16 €

Prezzo fabbrica rif. (EUR)

Basato sul costo barra al 2026-07-10. Il preventivo finale può variare.

ø3.00mm 5D Solid Carbide Drill

SKU: SCD-SCD-5D-D300

Preventivo WhatsApp RFQ emailUsa il modulo contatti →

✓ Prezzo diretto di fabbrica

✓ MOQ 1 piece, stock ships 1–5 days

✓ Lunghezze e diametri speciali disponibili

Dimensioni complete

Specifiche tecniche

Diametro taglio (D1 h7)ø3,00 mm
Equivalente imperiale0.1181"
Lunghezza scanalatura (L2)28,00 mm
Diametro codolo (D2 h6)ø4,00 mm
Lunghezza totale (L1)58,00 mm
Rapporto profondità5D (5× diameter)
Angolo punta140°
Angolo elica30°
Numero taglienti2
Refrigerazione internaNessuna External flood coolant compatible
RivestimentoTiAlN / TiSiN Oerlikon Balzers BALINIT®
SubstratoK10/K20 Solid Carbide 10% Co binder
TolleranzaDIN 1414 · ISO 5419
MOQ1 pezzo
Tempo standard1–5 giorni lavorativi
Tempo speciale5–15 giorni lavorativi

5D Dimensional Drawing

D1 h7
ø3,00
L2
28,00
D2 h6
ø4,00
L1
58,00
Point
140°
Ratio
5D

Dove questo utensile eccelle

ø3.00mm 5D — recommended applications

  • ▸ PCB sub-assembly fixtures
  • ▸ Small instrument housings
  • ▸ Jig & fixture components
  • ▸ Prototype precision parts
Consiglio di lavorazione: At ø3.00mm, use compressed air rather than flood coolant to prevent re-cutting of fine chips. Feed rate 0.04–0.08 mm/rev; spindle speed up to 8,000 RPM depending on material.
Coolant Advice: Compressed air or light oil mist recommended. External flood coolant acceptable at lower feed rates.

Compatibilità materiali

Materiali consigliati

6061-T6 Aluminium
303 Stainless Steel
Mild Steel (S235)
Brass CW614N

5×D Solid Carbide Drill — External Coolant Compatible

Medium depth, cost-effective for machines without internal coolant

5xD solid carbide drillmedium depth drill no coolantflood coolant 5D drillsolid carbide medium reach

Need Deeper Reach or Higher-Pressure Coolant?

ø3.00mm is also available as a Coolant-Thru drill (up to 25D) with internal twin channels.

Internal coolant-thru variant: OAL 66.00mm · L2 28.00mm (same 5D ratio)

Vedi versione con refrigerazione interna

Stesso diametro, diversa profondità

ø3,00 mm Also Available In

3D
3D
OAL 54.00mm · L2 20.00mm

Stesso rapporto profondità, diametri vicini

Diametri vicini 5D

ø4.00
L2 36.00mm
OAL 66.00mm
ø5.00
L2 44.00mm
OAL 82.00mm
← Tutte le punte integraliø4.00mm 5D

Ready to Order ø3.00mm 5D Solid Carbide Drills?

Factory direct. MOQ 1 piece. Send us quantity and required delivery date — pricing confirmed within 4 business hours.

WhatsApp oraModulo contatti