Straight Flute Carbide Reamers
For blind and through holes. A versatile starting point when both hole types appear on the same purchasing list. Confirm stock allowance and chip clearance for each application.
View Dimensions & ApplicationsPDF page 1KY TOOLS / Reamers
Right-Hand Spiral Carbide Reamers
Recommended for blind holes; also suitable for through holes. The right-hand spiral helps return chips towards the entry, where bottom clearance and coolant access need careful review.
Ø2–20 mmH7 / DIN 1420DIN 6535-HA
Choose by hole type
Right-Hand Spiral Carbide Reamers
Recommended for blind holes; also suitable for through holes. The right-hand spiral helps return chips towards the entry, where bottom clearance and coolant access need careful review.
View Dimensions & ApplicationsPDF page 2
Left-Hand Spiral Carbide Reamers
For through holes. The left-hand spiral directs chips towards the exit. Keep exit clearance available; left-hand spiral describes the flute helix, while cutting remains right-hand.
View Dimensions & ApplicationsPDF page 3Tool Specifications
DIN 1420 reamer diameter tolerance for H7 holes
Target hole finish: Ra ≤ 1.6 μm
Unequal flute spacing
Cylindrical shank: DIN 6535-HA
Confirm the finished-hole limits, surface finish and inspection method with your RFQ. H7 and Ra are application targets; results depend on material, pre-hole quality, stock allowance, runout and coolant.
Ø2–20 mm / 28
Standard Dimensions
L3 is the shoulder-to-tip length shown in the drawing. L2 is overall length. All dimensions are in mm.
| Cutting diameterD1 | Shank diameterD2 | Flute lengthL1 | Shoulder-to-tip lengthL3 | Overall lengthL2 | FlutesZ | Request a Quote |
|---|---|---|---|---|---|---|
| 2.0 | 4 | 11 | 20 | 50 | 4 | Request a Quote |
| 2.5 | 4 | 14 | 26 | 57 | 4 | Request a Quote |
| 3.0 | 4 | 15 | 31 | 61 | 6 | Request a Quote |
| 3.5 | 4 | 18 | 36 | 70 | 6 | Request a Quote |
| 4.0 | 4 | 19 | 42 | 75 | 6 | Request a Quote |
| 4.5 | 6 | 21 | 46 | 80 | 6 | Request a Quote |
| 5.0 | 6 | 23 | 51 | 86 | 6 | Request a Quote |
| 5.5 | 6 | 26 | 56 | 93 | 6 | Request a Quote |
| 6.0 | 6 | 26 | 56 | 93 | 6 | Request a Quote |
| 6.5 | 8 | 28 | 62 | 101 | 6 | Request a Quote |
| 7.0 | 8 | 31 | 68 | 109 | 6 | Request a Quote |
| 7.5 | 8 | 31 | 68 | 109 | 6 | Request a Quote |
| 8.0 | 8 | 33 | 74 | 117 | 6 | Request a Quote |
| 8.5 | 10 | 33 | 74 | 117 | 6 | Request a Quote |
| 9.0 | 10 | 36 | 80 | 125 | 6 | Request a Quote |
| 9.5 | 10 | 36 | 80 | 125 | 6 | Request a Quote |
| 10.0 | 10 | 38 | 86 | 133 | 6 | Request a Quote |
| 10.5 | 12 | 38 | 86 | 133 | 6 | Request a Quote |
| 11.0 | 12 | 41 | 95 | 142 | 6 | Request a Quote |
| 12.0 | 12 | 44 | 104 | 151 | 6 | Request a Quote |
| 13.0 | 16 | 44 | 104 | 151 | 6 | Request a Quote |
| 14.0 | 16 | 47 | 108 | 160 | 8 | Request a Quote |
| 15.0 | 16 | 50 | 110 | 162 | 8 | Request a Quote |
| 16.0 | 16 | 52 | 118 | 170 | 8 | Request a Quote |
| 17.0 | 20 | 54 | 121 | 175 | 8 | Request a Quote |
| 18.0 | 20 | 56 | 128 | 182 | 8 | Request a Quote |
| 19.0 | 20 | 58 | 129 | 189 | 8 | Request a Quote |
| 20.0 | 20 | 60 | 135 | 195 | 8 | Request a Quote |
Buying & Application Questions
Does left-hand spiral mean left-hand cutting?
No. All three listed geometries are right-hand cutting. Spiral direction describes the flute helix and chip flow, not the spindle rotation.
Can a standard reamer correct a misplaced hole?
Reaming finishes an existing hole. Confirm pre-hole position, straightness and allowance before selecting the reamer; a precision diameter alone does not correct hole location.
How do I order a diameter outside the table?
Send the finished-hole drawing, limits, reach and work material. Request a drawing review for custom dimensions, coating or inspection requirements before ordering.
Request a Quote — Right-Hand Spiral Carbide Reamers
Send hole diameter and tolerance, blind/through hole and depth, workpiece material and hardness, pre-hole size, coolant arrangement, quantity and annual demand. For repeat orders or distribution, include coating, packaging and inspection-report requirements. Price, minimum order quantity and lead time are confirmed against your specification.
Related Holemaking Tools
FROM OUR WORKSHOP
Watch us grind and inspect our tools
Two videos filmed in our workshop: CNC tool grinding and dimensional inspection.
CNC grinding: end mills, drills & special cutters
See how we use a CNC grinder to make carbide end mills, drills and special cutters.
Watch on YouTubeMeasuring carbide end mills at 0.001 mm
Watch our ZOLLER inspection process for precision carbide end mills.
Watch on YouTube