CNC-Schleifen: Fräser, Bohrer und Sonderwerkzeuge
So fertigen wir Hartmetallfräser, Bohrer und Sonderwerkzeuge auf einer CNC-Schleifmaschine.
Auf YouTube ansehen3-Flute · Uncoated · Aluminium · Standard Reach
8mm 3-Flute Uncoated Solid Carbide Square End Millfor Aluminium & Non-Ferrous Machining
The 3-flute uncoated variant strikes the balance between chip clearance (3 vs 4 flutes) and rigidity, making it ideal for profile milling, contouring, and finishing passes in aluminium and copper alloys. Three equally-spaced flutes produce better surface finish than 2-flute on ramping and helical interpolation entries. Polished bright finish prevents material adhesion. Recommended for 5-axis machining centres and high-speed spindles above 15,000 RPM.
D1 8mmL2 35mmD2 8mmOAL 100mm3 FlutesUncoated CoatingNon-FerrousStandard ReachMOQ 1 pc
Get Pricing & Stock
Richtpreis
26,20 €
Richtpreis Werk (EUR)
Basierend auf Stabmaterial-Stand per 2026-07-10. Endgültiges Angebot kann abweichen.
8mm 3F Uncoated Square EM
L2 35mm · D2 8mm · OAL 100mm
Standard Reach · Aluminium
✓ Factory direct pricing
✓ MOQ 1 piece, ships 1–5 days
✓ Custom OAL and helix available
Full Dimensions
Technical Specifications
| Cutter Diameter (D1 h7) | 8 mm |
| Flute Length (L2) | 35 mm |
| Shank Diameter (D2 h6) | 8 mm |
| Overall Length (L1) | 100 mm |
| Number of Flutes | 3 |
| Coating | Uncoated Bright polished |
| Max Material Hardness | N/A (non-ferrous optimised) |
| Reach Category | Standard (D2/L1 = 0.080) |
| Helix Angle | 30°–45° (application dependent) |
| End Geometry | Square (flat end) |
| Substrate | K10/K20 Ultra-Fine Grain Carbide |
| Shank Tolerance | h6 |
| MOQ | 1 piece |
| Lead Time (standard) | 1–5 business days |
| Lead Time (custom) | 5–15 business days |
Uncoated · 3 Flute · Aluminium
D1 h7
8mm
L2
35mm
D2 h6
8mm
L1
100mm
Flutes
3
Reach
Standard
Where This Tool Excels
8mm Uncoated 3F — Recommended Applications
- ▸Automotive component profiling and slotting
- ▸General CNC machining centre operations
- ▸Pump and valve body pocket features
- ▸Jig and fixture plate machining
Machining Tip: At ø8mm, the tool-to-work stiffness ratio is well-balanced. In aluminium alloy, aggressive parameters are achievable: axial depth up to 1×D, radial engagement 30–50% for profiling. Use climb milling for best surface finish.
Coating Performance
Uncoated — Why It Works
- ▸Bright polished finish — zero micro-adhesion on aluminium
- ▸Eliminates built-up edge (BUE) in soft metals
- ▸Superior chip evacuation at high spindle speeds
- ▸Recommended with air blast or light oil mist
- ▸Mirror surface finish on aluminium: Ra < 0.4µm achievable
ISO N3 flute aluminium end mill uncoated3 flute non-ferrous carbide end milluncoated 3 flute end mill aluminiumbright carbide end mill copper
Same Diameter, Different Reach
ø8mm Uncoated · 3 Flute · Aluminium — Other Flute Lengths
Same Size, Different Coating
ø8mm / L2 35mm — Other Variants
Order 8mm 3-Flute Uncoated Today
Factory direct. MOQ 1 piece. Pricing confirmed within 4 hours.
AUS UNSERER WERKSTATT
So schleifen und prüfen wir unsere Werkzeuge
Zwei Aufnahmen aus unserer Werkstatt: CNC-Werkzeugschleifen und Maßprüfung.
Hartmetallfräser im Bereich von 0,001 mm messen
Einblick in unsere ZOLLER-Prüfung von Präzisions-Hartmetallfräsern.
Auf YouTube ansehen